CMA 70 Microdialysis Bolt Catheter
|
|
)
|
For bolt implantation
The CMA 70 Microdialysis Bolt Catheter is designed for implantation in brain tissue through the IM2 Bolt kit for 2 brain probes or the IM3 Bolt Kit for 3 brain probes from Integra. The catheter has a 130 mm long shaft and a membrane length of 10 mm. The shaft has a reinforced stainless steel section measuring 16.5 mm in length. This reinforcement is located where the compression screw of the bolt is to be tightened.
The tip of the Catheter contains a gold tread, which makes it visible on a CT-scan in order to locate the exact position of the catheter in the brain.
The catheter inlet tubing is connected to a CMA Microdialysis Pump and the outlet ends in a microvial which collects the sample. The samples can be analyzed in the CMA Microdialysis Analyzer for Glucose, Lactate, Pyruvate, Glycerol, Glutamate and Urea or sent to the laboratory for further analysis.
Technical information for CMA 70 Bolt |
|||
|
Membrane Cut-off: Approx. 20 000 Daltons Sterilized with beta-radiation |
|||
| Material | Length (mm) | Diameter (mm) | |
| Shaft | Polyurethane | 130 | 0.9 |
| Membrane | Polyamide | 10 | 0.6 |
| Inlet Tubing ID/OD | Polyurethane | 600 | 0.15/1.0 |
| Outlet Tubing ID/OD | Polyurethane | 220 | 0.15/1.0 |
Ordering information for CMA 70 Bolt |
|||
|
|||
|
Ref. No.
Accessories: |
|||